Lab 11 : HDLC

Langsung saja, download soal latihannya disini :
Lab 11 : HDLC

Pada lab ini, kita akan mencoba mengkonfigurasi HDLC di Link Serial.

Semoga percobaan ini berjalan dengan lancar. Amin. :D

Soal :

1. Use the connected laptops to find the DCE and DTE routers.
   You can connect to the routers using CLI.
2. Configure the routers with the following parameters :
   Clock : 250000
   HDLC link between the routers
   DCE IP : 192.168.10.5/30
   DTE IP : 192.168.10.6/30
3. Check IP connectivity using ping command.

Jawab :

1. Router-A#show controllers s0/0/0
   Router-B#show controllers s0/0/0
2. Router-A(config)#interface s0/0/0
   Router-A(config-if)#encapsulation hdlc
   Router-A(config-if)#ip address 192.168.10.6 255.255.255.252
   Router-A(config-if)#no shutdown
   
   Router-B(config)#interface s0/0/0
   Router-B(config-if)#clock rate 250000
   Router-B(config-if)#encapsulation hdlc
   Router-B(config-if)#ip address 192.168.10.5 255.255.255.252Router-B(config-if)#no shutdown
3. Router-A#ping 192.168.10.5
   
   Type escape sequence to abort.
   Sending 5, 100-byte ICMP Echos to 192.168.10.5, timeout is 2 seconds:
   !!!!!
   Success rate is 100 percent (5/5), round-trip min/avg/max = 4/67/321 ms
   
   Router-B#ping 192.168.10.6
   
   Type escape sequence to abort.
   Sending 5, 100-byte ICMP Echos to 192.168.10.6, timeout is 2 seconds:
   !!!!!
   Success rate is 100 percent (5/5), round-trip min/avg/max = 2/5/15 ms

Demikian percobaan kali ini. Semoga dari percobaan ini dapat bermanfaat bagi agan-agan semua.
Silahkan untuk dicoba dan dipraktekkan.
:D