About

By

Comments

Post a Comment

Popular post

Lab 15 : Configuring Etherchannel

By
Image
Langsung saja, download soal latihannya disini : Lab 15 : Configuring Etherchannel Soal : LAYER 2 ETHERCHANNEL :  1. Configure CENTRAL switch interfaces with the following parameters : - Fa 0/1 and Fa 0/2 as PAGP desirable ports for etherchannel group n°1 - Fa 0/3 and Fa 0/4 as LACP active etherchannel port for etherchannel group n°2   2. Configure SW1 Fa 0/1 and Fa 0/2 interfaces as PAGP auto (etherchannel group n°1) 3. Configure SW2 Fa 0/1 and Fa 0/2 interfaces as LACP passive ports (etherchannel group n°1) LAYER 3 ETHERCHANNEL : 4. Configure CENTRAL Fa 0/23 and Fa 0/24 interfaces as unconditionnal Layer 3 etherchannel members for port channel 3 5. Configure CENTRAL Port Channel 3 interface with ip address 10.6.0.1/24 6. Configure ROUTER Fa 0/23 and Fa 0/24 interfaces as unconditionnal Layer 3 etherchannel members for port channel 1 7. Configure ROUTER Port Channel 1 interface with ip address 10.6.0.2/24 IP CONNECTIVITY : 8. Configure RIP v2 on C...
Read more

Lab 11 : HDLC

By
Image
Langsung saja, download soal latihannya disini : Lab 11 : HDLC Pada lab ini, kita akan mencoba mengkonfigurasi HDLC di Link Serial. Semoga percobaan ini berjalan dengan lancar. Amin. :D Soal : Use the connected laptops to find the DCE and DTE routers. You can connect to the routers using CLI. Configure the routers with the following parameters : Clock : 250000 HDLC link between the routers DCE IP : 192.168.10.5/30 DTE IP : 192.168.10.6/30 Check IP connectivity using ping command.
Read more

Lab 3 : VLAN and VTP configuration

By
Image
Disela-sela jadwal UAS yg padat masih sempat-sempatnya saya ngeblog, itung-itung ngilangin rasa jenuh belajar. :D hehehhe..... Kali ini saya coba mengkonfigurasi VLAN dan VTP. soal latihannya bisa didownload di sini :   Lab 3 : VLAN and VTP configuration Tujuan dari Lab ini adalah untuk mengecek kemampuan anda semua dalam mengkonfigurasi VTP dan VLAN di Small Network yg terdiri dari 4 Switch. Mungkin materi ini bisa membantu agan-agan semua persiapan ujian ICND1. Soal : Configure the VTP-SERVER switch as a VTP server. Connect to the 3 other switches and configure them as VTP clients. All links between switches must be configured as trunk lines. Configure VTP domain name as "TESTDOMAIN" and VTP password as "cisco". Configure VLAN 10 with name "STUDENTS" and VLAN 50 with name "SERVERS". Check propagation on all switches of the VTP domain. Telnet password : cisco Enable password : cisco  Topology Jawab Konfigurasi switch VTP...
Read more